My airflow and the cpu cooler in general are pretty good, the cpu is overclocked to 4ghz and under full cinebench r20 load it doesnt even reach 70C but at idle my cpu will sit around 56C, after opening hwinfo or hwmonitor the temp checks out (Tdie) and it shows that thread 0,2 and 6 are at full 100% load. What could be causing this. Task manager doesnt show anything unordinary going on and the usage is <5%submitted by Sonny1941 to AMDHelp [link] [comments]
Computer Type: Custom dekstop
GPU: Gainward Ghost RTX 2060 6GB
CPU: 1600X 4.0GHz 1.35V
Motherboard: ASRock AB350M
RAM: Patriot Viper Steel 3400MHz 2x8GB 2nd and 4th slot. XMP set to 3200MHz
PSU: Corsair CX650M
Operating System & Version: Windows 10 Pro Version 2004
GPU Drivers: 452.06
Chipset Drivers: P5.50
Background Applications: Spotify, MSI Afterburner, Riva Statistic Tuner, NVIDIA Settings
Troubleshooting: Tried removing the cpu overclock
SOLVED: Trojan bitcoin miner deep in chrome folder
Yes. You pick a peer and after some setup, create a bitcoin transaction to fund the lightning channel; it’ll then take another transaction to close it and release your funds. You and your peer always hold a bitcoin transaction to get your funds whenever you want: just broadcast to the blockchain like normal. In other words, you and your peer create a shared account, and then use Lightning to securely negotiate who gets how much from that shared account, without waiting for the bitcoin blockchain.
Yes, Lightning is open source. Anyone can review the code (in the same way as the bitcoin code)
Similar to the bitcoin network, no one will ever own or control the Lightning Network. The code is open source and free for anyone to download and review. Anyone can run a node and be part of the network.
No, your bitcoin will never leave the blockchain. Instead your bitcoin will be held in a multi-signature address as long as your channel stays open. When the channel is closed; the final transaction will be added to the blockchain. “Off-chain” is not a perfect term, but it is used due to the fact that the transfer of ownership is no longer reflected on the blockchain until the channel is closed.
Example: A and B have a channel. 1 BTC each. A sends B 0.5 BTC. B sends back 0.25 BTC. Balance should be A = 0.75, B = 1.25. If A gets disconnected, B can publish the first Tx where the balance was A = 0.5 and B = 1.5. If the node B does in fact attempt to cheat by publishing an old state (such as the A=0.5 and B=1.5 state), this cheat can then be detected on-chain and used to steal the cheaters funds, i.e., A can see the closing transaction, notice it's an old one and grab all funds in the channel (A=2, B=0). The time that A has in order to react to the cheating counterparty is given by the CheckLockTimeVerify (CLTV) in the cheating transaction, which is adjustable. So if A foresees that it'll be able to check in about once every 24 hours it'll require that the CLTV is at least that large, if it's once a week then that's fine too. You definitely do not need to be online and watching the chain 24/7, just make sure to check in once in a while before the CLTV expires. Alternatively you can outsource the watch duties, in order to keep the CLTV timeouts low. This can be achieved both with trusted third parties or untrusted ones (watchtowers). In the case of a unilateral close, e.g., you just go offline and never come back, the other endpoint will have to wait for that timeout to expire to get its funds back. So peers might not accept channels with extremely high CLTV timeouts. -- Source
Tiny payments are possible: since fees are proportional to the payment amount, you can pay a fraction of a cent; accounting is even done in thousandths of a satoshi. Payments are settled instantly: the money is sent in the time it takes to cross the network to your destination and back, typically a fraction of a second.
Yes, but not in theory. You could make a poorer lightning network without it, which has higher risks when establishing channels (you might have to wait a month if things go wrong!), has limited channel lifetime, longer minimum payment expiry times on each hop, is less efficient and has less robust outsourcing. The entire spec as written today assumes segregated witness, as it solves all these problems.
No, for now. For the first version of the protocol, if you wanted to send a normal bitcoin transaction using your channel, you have to close it, send the funds, then reopen the channel (3 transactions). In future versions, you and your peer would agree to spend out of your lightning channel funds just like a normal bitcoin payment, allowing you to use your lightning wallet like a normal bitcoin wallet.
Not really. Anyone can set up a node, and so it’s a race to the bottom on fees. In practice, we may see the network use a nominal fee and not change very much, which only provides an incremental incentive to route on a node you’re going to use yourself, and not enough to run one merely for fees. Having clients use criteria other than fees (e.g. randomness, diversity) in route selection will also help this.
Lightning is already being tested on the Mainnet Twitter Link but as for a specific date, Jameson Lopp says it best
Nope, because there is no custody ever involved. It's just like forwarding packets. -- Source
Furthermore, the Lightning Network scales not with the transaction throughput of the underlying blockchain, but with modern data processing and latency limits - payments can be made nearly as quickly as packets can be sent. -- Source
Each exchange will get to decide and need to implement the software into their system, but some ideas have been outlined here: Google Doc - Lightning Exchanges
Note that by virtue of the usual benefits of cost-less, instantaneous transactions, lightning will make arbitrage between exchanges much more efficient and thus lead to consistent pricing across exchange that adopt it. -- Source
According to Rusty's calculations we should be able to store 1 million nodes in about 100 MB, so that should work even for mobile phones. Beyond that we have some proposals ready to lighten the load on endpoints, but we'll cross that bridge when we get there. -- Source
No you'd remember the information from the last time you started the app and only sync the differences. This is not yet implemented, but it shouldn't be too hard to get a preliminary protocol working if that turns out to be a problem. -- Source
Lightning is based on participants in the network running lightning node software that enables them to interact with other nodes. This does not require being a full bitcoin node, but you will have to run "lnd", "eclair", or one of the other node softwares listed above.
All lightning wallets have node software integrated into them, because that is necessary to create payment channels and conduct payments on the network, but you can also intentionally run lnd or similar for public benefit - e.g. you can hold open payment channels or channels with higher volume, than you need for your own transactions. You would be compensated in modest fees by those who transact across your node with multi-hop payments. -- Source
Sure, you can help write up educational material. You can learn and read more about the tech at http://dev.lightning.community/resources. You can test the various desktop and mobile apps out there (Lightning Desktop, Zap, Eclair apps). -- Source
No -- Source
lit doesn't depend on having your own full node -- it automatically connects to full nodes on the network. -- Source
LND uses a light client mode, so it doesn't require a full node. The name of the light client it uses is called neutrino
Upon opening a channel, the two endpoints first agree on a reserve value, below which the channel balance may not drop. This is to make sure that both endpoints always have some skin in the game as rustyreddit puts it :-)
For a cheat to become worth it, the opponent has to be absolutely sure that you cannot retaliate against him during the timeout. So he has to make sure you never ever get network connectivity during that time. Having someone else also watching for channel closures and notifying you, or releasing a canned retaliation, makes this even harder for the attacker. This is because if he misjudged you being truly offline you can retaliate by grabbing all of its funds. Spotty connections, DDoS, and similar will not provide the attacker the necessary guarantees to make cheating worthwhile. Any form of uncertainty about your online status acts as a deterrent to the other endpoint. -- Source
You typically want to have more than one channel open at any given time for redundancy's sake. And we imagine open and close will probably be automated for the most part. In fact we already have a feature in LND called autopilot that can automatically open channels for a user.
Frequency will depend whether the funds are needed on-chain or more useful on LN. -- Source
You don't really set up a "node" in the sense that anyone with more than one channel can automatically be a node and route payments. Fees on LN can be set by the node, and can change dynamically on the network. -- Source
Yes but it has to be implemented in the Lightning software being used. -- Source
You won't have to do anything. With autopilot enabled, it'll automatically open and close channels based on the availability of the network. -- Source
submitted by crypt0hodl1 to PundiX [link] [comments]
PrologueThis is a Concept Paper written to introduce the Function X Ecosystem, which includes the XPhone. It also addresses the relationship between the XPOS and Function X.
Pundi X has always been a community-driven project. We have lived by the mission of making sure the community comes first and we are constantly learning from discussions and interactions on social media and in real-life meetings.
As with all discussions, there is always background noise but we have found gems in these community discussions. One such example is a question which we found constantly lingering at the back of our mind, “Has blockchain changed the world as the Internet did in the ’90s, and the automobile in the ‘20s?”. Many might argue that it has, given the rise of so many blockchain projects with vast potential in different dimensions (like ours, if we may add). But the question remains, “can blockchain ever become what the Internet, as we know it today, has to the world?”
Function X, a universal decentralized internet which is powered by blockchain technology and smart devices.
Over the past few months, in the process of implementing and deploying the XPOS solution, we believe we found the answer to the question. A nimble development team was set up to bring the answer to life. We discovered that it is indeed possible to bring blockchain to the world of telephony, data transmission, storage and other industries; a world far beyond financial transactions and transfers.
This is supported by end-user smart devices functioning as blockchain nodes. These devices include the XPOS and XPhone developed by Pundi X and will also include many other hardware devices manufactured by other original equipment manufacturers.
The vision we want to achieve for f(x) is to create a fully autonomous and decentralized network that does not rely on any individual, organization or structure.
Due to the nature of the many new concepts introduced within this Concept Paper, we have included a Q&A after each segment to facilitate your understanding. We will continuously update this paper to reflect the progress we’re making.
Function X: The Internet was just the beginningThe advent of the Internet has revolutionized the world. It created a communications layer so robust that it has resulted in TCP/IP becoming the network standard.
The Internet also created a wealth of information so disruptive that a company like Amazon threatened to wipe out all the traditional brick-and-mortar bookstores. These bookstores were forced to either adapt or perish. The same applies to the news publishing sector: the offerings of Google and Facebook have caused the near extinction of traditional newspapers.
The digitalization of the world with the Internet has enabled tech behemoths like Apple, Amazon, Google and Facebook to dominate and rule over traditional companies. The grip of these tech giants is so extensive that it makes you wonder if the choices you make are truly your own or influenced by the data they have on you as a user.
We see the blockchain revolution happening in three phases. The first was how Bitcoin showed the world what digital currency is. The second refers to how Ethereum has provided a platform to build decentralized assets easily. The clearest use case of that has come in the form of the thousands of altcoins seen today that we all are familiar with. The third phase is what many blockchain companies are trying to do now: 1) to bring the performance of blockchain to a whole new level (transaction speed, throughput, sharding, etc.) and 2) to change the course of traditional industries and platforms—including the Internet and user dynamics.
Public blockchains allow trustless transactions. If everything can be transacted on the blockchain in a decentralized manner, the information will flow more efficiently than traditional offerings, without the interception of intermediators. It will level the playing field and prevent data monopolization thus allowing small innovators to develop and flourish by leveraging the resources and data shared on the blockchain.
The Blockchain revolution will be the biggest digital revolutionIn order to displace an incumbent technology with something new, we believe the change and improvement which the new technology has to bring will have to be at least a tenfold improvement on all aspects including speed, transparency, scalability and governance (consensus). We are excited to say that the time for this 10-times change is here. It’s time to take it up 10x with Function X.
Function X or f(x) is an ecosystem built entirely on and for the blockchain. Everything in f(x) (including the application source code, transmission protocol and hardware) is completely decentralized and secure. Every bit and byte in f(x) is part of the blockchain.
What we have developed is not just a public chain. It is a total decentralized solution. It consists of five core components: Function X Operating System (OS); Function X distributed ledger (Blockchain); Function X IPFS; FXTP Protocol and Function X Decentralized Docker. All five components serve a single purpose which is to decentralize all services, apps, websites, communications and, most importantly, data.
The purpose of Function X OS is to allow smart hardware and IoTs to harness the upside and potential utility of the decentralization approach. We have built an in-house solution for how mobile phones can leverage Function X OS in the form of the XPhone. Other companies can also employ the Function X OS and further customize it for their own smart devices. Every smart device in the Function X ecosystem can be a node and each will have its own address and private key, uniquely linked to their node names. The OS is based on the Android OS 9.0, therefore benefiting from backward compatibility with Android apps. The Function X OS supports Android apps and Google services (referred to as the traditional mode), as well as the newly developed decentralized services (referred to as the blockchain mode). Other XPhone features powered by the Function X OS will be elaborated on in the following sections.
Using the Function X Ecosystem (namely Function X FXTP), the transmission of data runs on a complex exchange of public and private key data and encryption but never through a centralized intermediary. Hence it guarantees communication without interception and gives users direct access to the data shared by others. Any information that is sent or transacted over the Function X Blockchain will also be recorded on the chain and fully protected by encryption so the ownesender has control over data sharing. And that is how a decentralized system for communications works.
For developers and users transitioning to the Function X platform, it will be a relatively seamless process. We have intentionally designed the process of creating and publishing new decentralized applications (DApps) on Function X to be easy, such that the knowledge and experience from developing and using Android will be transferable. With that in mind, a single line of code in most traditional apps can be modified, and developers can have their transmission protocol moved from the traditional HTTP mode (centralized) to a decentralized mode, thus making the transmission “ownerless” because data can transmit through the network of nodes without being blocked by third parties. How services can be ported easily or built from scratch as DApps will also be explained in the following sections, employing technologies in the Function X ecosystem (namely Function X IPFS, FXTP Protocol and Decentralized Docker).
f(x) Chainf(x) chain is a set of consensus algorithms in the form of a distributed ledger, as part of the Function X ecosystem. The blockchain is the building block of our distributed ledger that stores and verifies transactions including financials, payments, communications (phone calls, file transfers, storage), services (DApps) and more.
Will Function X launch a mainnet?Yes. The f(x) chain is a blockchain hence there will be a mainnet.
When will the testnet be launched?Q2 2019 (projected).
When will the mainnet be launched?Q3 2019 (projected).
How is the Function X blockchain designed?The f(x) chain is designed based on the philosophy that any blockchain should be able to address real-life market demand of a constantly growing peer-to-peer network. It is a blockchain with high throughput achieved with a combination of decentralized hardware support (XPOS, XPhone, etc.) and open-source software toolkit enhancements.
What are the physical devices that will be connected to the Function X blockchain?In due course, the XPOS OS will be replaced by the f(x) OS. On the other hand, the XPhone was designed with full f(x) OS integration in mind, from the ground up. After the f(x) OS onboarding, and with adequate stability testings and improvements, XPOS and XPhone will then be connected to the f(x) Chain.
What are the different elements of a block?Anything that is transmittable over the distributed network can be stored in the block, including but not limited to phone call records, websites, data packets, source code, etc. It is worth noting that throughout these processes, all data is encrypted and only the owner of the private key has the right to decide how the data should be shared, stored, decrypted or even destroyed.
Which consensus mechanism is used?
Practical Byzantine Fault Tolerance (PBFT).
What are the other implementations of Practical Byzantine Fault Tolerance (PBFT)?Flight systems that require very low latency. For example, SpaceX’s flight system, Dragon, uses PBFT design philosophy. [Appendix]
How do you create a much faster public chain?We believe in achieving higher speed, thus hardware and software configurations matter. If your hardware is limited in numbers or processing power, this will limit the transaction speed which may pose security risks. The Ethereum network consists of about 25,000 nodes spread across the globe now, just two years after it was launched. Meanwhile, the Bitcoin network currently has around 7,000 nodes verifying the network. As for Pundi X, with the deployment plan (by us and our partners) for XPOS, XPhone and potentially other smart devices, we anticipate that we will be able to surpass the number of Bitcoin and Ethereum nodes within 1 to 2 years. There are also plans for a very competitive software implementation of our public blockchain, the details for which we will be sharing in the near future.
f(x) OSThe f(x) OS is an Android-modified operating system that is also blockchain-compatible. You can switch seamlessly between the blockchain and the traditional mode. In the blockchain mode, every bit and byte is fully decentralized including your calls, messages, browsers and apps. When in traditional mode, the f(x) OS supports all Android features.
Android is the most open and advanced operating system for smart hardware with over 2 billion monthly active users. Using Android also fits into our philosophy of being an OS/software designer and letting third-party hardware makers produce the hardware for the Function X Ecosystem.
What kind of open source will it be?This has not been finalized, but the options we are currently considering are Apache or GNU GPLv3.
What kind of hardware will it work on?The f(x) OS works on ARM architecture, hence it works on most smartphones, tablet computers, smart TVs, Android Auto and smartwatches in the market.
Will you build a new browser?We are currently using a modified version of the Google Chrome browser. The browser supports both HTTP and FXTP, which means that apart from distributed FXTP contents, users can view traditional contents, such ashttps://www.google.com.
What is the Node Name System (NNS)?A NNS is a distributed version of the traditional Domain Name System. A NNS allows every piece of Function X hardware, including the XPhone, to have a unique identity. This identity will be the unique identifier and can be called anything with digits and numbers, such as ‘JohnDoe2018’ or ‘AliceBob’. More on NNS in the following sections.
Will a third-party device running the f(x) OS be automatically connected to the f(x) blockchain?
Yes, third-party devices will be connected to the f(x) blockchain automatically.
f(x) FXTPA transmission protocol defines the rules to allow information to be sent via a network. On the Internet, HTTP is a transmission protocol that governs how information such as website contents can be sent, received and displayed. FXTP is a transmission protocol for the decentralized network.
FXTP is different from HTTP because it is an end-to-end transmission whereby your data can be sent, received and displayed based on a consensus mechanism rather than a client-server based decision-making mechanism. In HTTP, the server (which is controlled by an entity) decides how and if the data is sent (or even monitored), whereas in FXTP, the data is sent out and propagates to the destination based on consensus.
HTTP functions as a request–response protocol in the client-server computing model. A web browser, for example, may be the client and an application running on a computer hosting a website may be the server. FXTP functions as a propagation protocol via a consensus model. A node that propagates the protocol and its packet content is both a “client” and a “server”, hence whether a packet reaches a destination is not determined by any intermediate party and this makes it more secure.
f(x) IPFSIPFS is a protocol and network designed to store data in a distributed system. A person who wants to retrieve a file will call an identifier (hash) of the file, IPFS then combs through the other nodes and supplies the person with the file.
The file is stored on the IPFS network. If you run your own node, your file would be stored only on your node and available for the world to download. If someone else downloads it and seeds it, then the file will be stored on both your node the node of the individual who downloaded it (similar to BitTorrent).
IPFS is decentralized and more secure, which allows faster file and data transfer.
f(x) DDockerDocker is computer program designed to make it easier to create, deploy, and run applications. Containers allow a developer to package up an application including libraries, and ship it all out as a package.
As the name suggests, Decentralized Docker is an open platform for developers to build, ship and run distributed applications. Developers will be able to store, deploy and run their codes remote in different locations and the codes are secure in a decentralized way.
Beyond crypto: First true blockchain phone that is secured and decentralized to the coreXPhone is the world’s first blockchain phone which is designed with innovative features that are not found on other smartphones.
Powered by Function X, an ecosystem built entirely on and for the blockchain, XPhone runs on a new transmission protocol for the blockchain age. The innovation significantly expands the use of blockchain technology beyond financial transfers.
Unlike traditional phones which require a centralized service provider, XPhone runs independently without the need for that. Users can route phone calls and messages via blockchain nodes without the need for phone numbers.
Once the XPhone is registered on the network, for e.g., by a user named Pitt, if someone wants to access Pitt’s publicly shared data or content, that user can just enter FXTP://xxx.Pitt. This is similar to what we do for the traditional https:// protocol.
Whether Pitt is sharing photos, data, files or a website, they can be accessed through this path. And if Pitt’s friends would like to contact him, they can call, text or email his XPhone simply by entering “call.pitt”, “message.pitt”, or “mail.pitt”.
The transmission of data runs on a complex exchange of public and private key data with encryption. It can guarantee communication without interception and gives users direct access to the data shared by others. Any information that is sent or transacted over the Function X Blockchain will also be recorded on the chain.
Toggle between now and the futureBlockchain-based calling and messaging can be toggled on and off on the phone operating system which is built on Android 9.0. XPhone users can enjoy all the blockchain has to offer, as well as the traditional functionalities of an Android smartphone.
We’ll be sharing more about the availability of the XPhone and further applications of Function X in the near future.
DApps for mass adoptionSo far the use of decentralized applications has been disappointing. But what if there was a straightforward way to bring popular, existing apps into a decentralized environment, without rebuilding everything? Until now, much of what we call peer-to-peer or ‘decentralized’ services continue to be built on centralized networks. We set out to change that with Function X; to disperse content now stored in the hands of the few, and to evolve services currently controlled by central parties.
Use Cases: Sharing economyAs seen from our ride-hailing DApp example that was demonstrated in New York back in November 2018, moving towards true decentralization empowers the providers of services and not the intermediaries. In the same way, the XPhone returns power to users over how their data is being shared and with whom. Function X will empower content creators to determine how their work is being displayed and used.
Use Cases: Free namingOne of the earliest alternative cryptocurrencies, Namecoin, wanted to use a blockchain to provide a name registration system, where users can register their names to create a unique identity. It is similar to the DNS system mapping to IP addresses. With the Node Name System (NNS) it is now possible to do this on the blockchain.
NNS is a distributed version of the traditional Domain Name System. A NNS allows every piece of Function X hardware, including the XPhone, to have a unique identifier that can be named anything with digits and numbers, such as ‘JohnDoe2018’ or ‘AliceBob’.
Use Cases: Mobile data currencyAccording to a study, mobile operator data revenues are estimated at over $600 billion USD by 2020, equivalent to $50 billion USD per month [appendix]. Assuming users are able to use services such as blockchain calls provided by XPhone (or other phones using Function X) the savings will be immense and the gain from profit can be passed on to providers such as DApp developers in Function X. In other words, instead of paying hefty bills to a mobile carrier for voice calls, users can pay less by making blockchain calls, and the fees paid are in f(x) coins. More importantly users will have complete privacy over their calls.
Use Cases: Decentralized file storage
Ethereum contracts claim to allow for the development of a decentralized file storage ecosystem, “where individual users can earn small quantities of money by renting out their own hard drives and unused space can be used to further drive down the costs of file storage.” However, they do not necessarily have the hardware to back this up. With the deployment of XPOS, smart hardware nodes and more, Function X is a natural fit for Decentralized File Storage. In fact, it is basically what f(x) IPFS is built for.
These are just four examples of the many use cases purported, and there can, will and should be more practical applications beyond these; we are right in the middle of uncharted territories.
Decentralized and autonomousThe f(x) ecosystem is fully decentralized. It’s designed and built to run autonomously in perpetuity without the reliance or supervision of any individual or organization. To support this autonomous structure, f(x) Coin which is the underlying ‘currency’ within the f(x) ecosystem has to be decentralized in terms of its distribution, allocation, control, circulation and the way it’s being generated.
To get the structure of f(x) properly set up, the founding team will initially act as ‘initiators’ and ‘guardians’ of the ecosystem. The role of the team will be similar to being a gatekeeper to prevent any bad actors or stakeholders playing foul. At the same time, the team will facilitate good players to grow within the ecosystem. Once the f(x) ecosystem is up and running, the role of the founding team will be irrelevant and phased out. The long term intention of the team is to step away, allowing the ecosystem to run and flourish by itself.
UtilityIn this section, we will explore the utility of the f(x) Coin. f(x) Coin is the native ‘currency’ of the Function X blockchain and ecosystem. All services rendered in the ecosystem will be processed, transacted with, or “fueled” by the f(x) Coin. Some of the proposed use cases include:
Example 1: A developer creates a ride-hailing DApp called DUber.
DUber developer first uploads the image and data to IPFS (storage) and code to DDocker, respectively. The developer then pays for a decentralized code hosting service provided by the DDocker, and a decentralized file hosting service provided by the IPFS. Please note the storage hosting and code hosting services can be provided by a company, or by a savvy home user with smart nodes connected to the Function X ecosystem. Subsequently, a DUber user pays the developer.
Example 2: User Alice sends an imaginary token called ABCToken to Bob.
ABCToken is created using Function X smart contract. Smart nodes hosted at the home of Charlie help confirms the transaction, Charlie is paid by Alice (or both Alice and Bob).
The flow of f(x) CoinFour main participants in f(x): Consumer (blue), Developer (blue), Infrastructure (blue), and Financial Service Provider (green)
Broadly speaking, there can be four main participants in the f(x) ecosystem, exhibited by the diagram above:
Figure: four main participants of the ecosystem The rationale behind f(x) Coin generation is the Proof of Service concept (PoS)Service providers are crucial in the whole f(x) Ecosystem, the problem of motivation/facilitation has become our priority. We have to align our interests with theirs. Hence, we have set up a Tipping Jar (similar to mining) to motivate and facilitate the existing miners shift to the f(x) Ecosystem and become part of the infrastructure service provider or attract new players into our ecosystem. Income for service provider = Service fee (from payer) + Tipping (from f(x) network generation)
The idea is that the f(x) blockchain will generate a certain amount of f(x) Coin (diminishing annually) per second to different segments of service provider, such as in the 1st year, the f(x) blockchain will generate 3.5 f(x) Coin per second and it will be distributed among the infrastructure service provider through the Proof of Service concept. Every service provider such as infrastructure service providers, developers and financial service providers will receive a ‘certificate’ of Proof of Service in the blockchain after providing the service and redeeming the f(x) Coin.
Example: There are 3 IPFS providers in the market, and the total Tipping Jar for that specific period is 1 million f(x) Coin. Party A contributes 1 TB; Party B contributes 3 TB and Party C contributes 6 TB. So, Party A will earn 1/10 * 1 million = 100k f(x) Coin; Party B will earn 3/10 * 1 million = 300k f(x) Coin. Party C will earn 6/10 * 1 million = 600k f(x) Coin.
Note: The computation method of the distribution of the Tipping Jar might vary due to the differences in the nature of the service, period and party.
Figure: Circulation flow of f(x) Coin
The theory behind the computation.Blockchain has integrated almost everything, such as storage, scripts, nodes and communication. This requires a large amount of bandwidth and computation resources which affects the transaction speed and concurrency metric.
In order to do achieve the goal of being scalable with high transaction speed, the f(x) blockchain has shifted out all the ‘bulky’ and ‘heavy duty’ functions onto other service providers, such as IPFS, FXTP, etc. We leave alone what blockchain technology does best: Calibration. Thus, the role of the Tipping Jar is to distribute the appropriate tokens to all participants.
Projected f(x) Coin distribution per second in the first year
According to Moore’s Law, the number of transistors in a densely integrated circuit doubles about every 18 -24 months. Thus, the performance of hardware doubles every 18-24 months. Taking into consideration Moore’s Law, Eric Schmidt said if you maintain the same hardware specs, the earnings will be cut in half after 18-24 months. Therefore, the normal Tipping Jar (reward) for an infrastructure service provider will decrease 50% every 18 months. In order to encourage infrastructure service providers to upgrade their hardware, we have set up another iteration and innovation contribution pool (which is worth of 50% of the normal Tipping Jar on the corresponding phase) to encourage the infrastructure service provider to embrace new technology.
According to the Andy-Bill’s law, “What Andy gives, Bill takes away”; software will always nibble away the extra performance of the hardware. The more performance a piece of hardware delivers, the more the software consumes. Thus, the developer will always follow the trend to maintain and provide high-quality service. The Tipping Jar will increase by 50% (based upon the previous quota) every 18 months.
Financial service providers will have to support the liquidation of the whole ecosystem along the journey, the Tipping Jar (FaaS) will increase by 50% by recognizing the contribution and encouraging innovation.
From the 13th year (9th phase), the Tipping Jar will reduce by 50% every 18 months. We are well aware that the “cliff drop” after the 12th year is significant. Hence, we have created a 3year (two-phase) diminishing transition period. The duration of each phase is 18 months. There are 10 phases in total which will last for a total of 15 years.
According to Gartner’s report, the blockchain industry is forecast to reach a market cap of
3.1 trillion USD in 2030. Hence, we believe a Tipping Jar of 15 years will allow the growth of Function X into the “mature life cycle” of the blockchain industry.
f(x) Coin / Token AllocationToken allocation We believe great blockchain projects attempt to equitably balance the interests of different segments of the community. We hope to motivate and incentivize token holders by allocating a total of 65% of tokens from the Token Generation Event (TGE). Another 20% is allocated to the Ecosystem Genesis Fund for developer partnerships, exchanges and other such related purposes. The remaining 15% will go to engineering, product development and marketing. There will be no public or private sales for f(x) tokens.
NPXS / NPXSXEM is used to make crypto payments as easy as buying bottled water, while f(x) is used for the operation of a decentralized ecosystem and blockchain, consisting of DApps and other services. NPXS / NPXSXEM will continue to have the same functionality and purpose after the migration to the Function X blockchain in the future. Therefore, each token will be expected to assume different fundamental roles and grant different rights to the holders.
65% of allocation for NPXS / NPXSXEM holders is broken down into the following: 15% is used for staking (see below) 45% is used for conversion to f(x) tokens. (see below) 5% is used for extra bonus tasks over 12 months (allocation TBD).
Remarks All NPXS / NPXSXEM tokens that are converted will be removed from the total supply of NPXS / NPXSXEM; Pundi X will not convert company's NPXS for f(x) Tokens. This allocation is designed for NPXS/NPXSXEM long term holders. NPXS / NPXSXEM tokens that are converted will also be entitled to the 15% f(x) Token distribution right after the conversion.
UsageManagement of the Ecosystem Genesis Fund (EGF)
The purpose of setting up the Ecosystem Initialization Fund, is to motivate, encourage and facilitate service providers to join and root into the f(x) Ecosystem and, at the same time, to attract seed consumers to enrich and enlarge the f(x) Ecosystem. EIF comes from funds raised and will be used as a bootstrap mechanism to encourage adoption before the Tipping Jar incentives fully kicks in.
The EGF is divided into 5 parts:
SummaryTime moves fast in the technology world and even faster in the blockchain space. Pundi X’s journey started in October 2017, slightly over a year ago, and we have been operating at a lightning pace ever since, making progress that can only be measured in leaps and bounds. We started as a blockchain payment solution provider and have evolved into a blockchain service provider to make blockchain technology more accessible to the general public, thereby improving your everyday life.
The creation of Function X was driven by the need to create a better suited platform for our blockchain point-of sale network and through that process, the capabilities of Function X have allowed us to extend blockchain usage beyond finance applications like payment solutions and cryptocurrency.
The complete decentralized ecosystem of Function X will change and benefit organizations, developers, governments and most importantly, society as a whole.
The XPhone prototype which we have created is just the start to give everyone a taste of the power of Function X on how you can benefit from a truly decentralized environment. We envision a future where the XPOS, XPhone and other Function X-enabled devices work hand-in-hand to make the decentralized autonomous ecosystem a reality.
You may wonder how are we able to create such an extensive ecosystem within a short span of time? We are fortunate that in today’s open source and sharing economy, we are able to tap onto the already established protocols (such as Consensus algorithm, FXTP, etc), software (like Android, IPFS, PBFT, Dockers, etc.) and hardware (design knowledge from existing experts) which were developed by selfless generous creators. Function X puts together, aggregates and streamlines all the benefits and good of these different elements and make them work better and seamlessly on the blockchain. And we will pay it forward by making Function X as open and as decentralized as possible so that others may also use Function X to create bigger and better projects.
To bring Function X to full fruition, we will continue to operate in a transparent and collaborative way. Our community will continue to be a key pillar for us and be even more vital as we get Function X up and running. As a community member, you will have an early access to the Function X ecosystem through the f(x) token conversion.
We hope you continue to show your support as we are working hard to disrupt the space and re-engineer this decentralized world.
ReferencePractical Byzantine Fault Tolerance
Byzantine General Problem technical paper
Global mobile data revenues to reach $630 billion by 2020
NPXSXEM token supply
NPXS circulating token supply and strategic purchaser
[total supply might differ from time to time due to token taken out of total supply aka “burn”]
ELC: SpaceX lessons learned (PBFT mentioned) https://lwn.net/Articles/540368/
|Rate (per day)||2.75||237.19|
Generated with BBoe's Subreddit Stats
im:[email protected];[email protected];[email protected]?message;subject=I.T%20Desk;body=Jabber%2010.5%20QueryMultiple people can be called using ciscotelconf: instead of ciscotel:
CISCOTELCONF:[email protected];[email protected]Alternatively:
While it makes me feel like a dumbass, I did attempt to check MyBTGWallet as I was curious about BTG and wanted to know if there was any to claim etc. Initially, I went to https://bitcoingold.org and saw their address check box, after inputting my address, I seem to recall there being a link to https://mybtgwallet.com/ underneath the box. So, I clicked on it and was brought to the site, but as I was extremely hesitant to give out any of my information, I tried to assure myself it was legit. It displayed a valid SSL Certificate at the time of my visiting so I decided I would proceed. Unfortunately, this makes it pretty clear that it was all my fault. I'm embarrassed to say the least, and certainly heartbroken at my losses. I guess I'm a little new and didn't think much of it when I was asked for my seed, looking back that's pretty fucking stupid, there's no reason they my seed right? But the valid SSL had me fooled. I will surely never do something so stupid again and will take steps to increase security on my own. However, I do think BTG and MyBTGWallet should take some blame for this as they are not ensuring the security of their users/potential users but ultimately this is clearly my fault.jprichardson expands more on in detail as to how this happened here: https://www.reddit.com/ethereum/comments/7d7sq8/all_my_ethereum_stolen_right_out_of_my_wallet/dpwphw5/
FYI, I think Freebitco.in links are blocked on reddit, but if anyone wants my referral link, send me a PM. I give 100% of my referral earnings back to my referrals.I have been paying 100% back for over a year now, and I don't plan on changing that.
[index]          
hello friends in this video I am going to tell you what is Bitcoin mining.how we can mine Bitcoin with your Google Chrome.today I am going to tell you about an extension by which you can make free ... How To Mine Bitcoin Using Google Chrome : Earn Free Bitcoin BitDigger Hello dosto ummid karta hu ki aap sab log thik honge aaj ke es Video mai ham Bitcoin kese earn karenge eske bareme janege es ... 3 Sites Free Bitcoin Mining - Start Mining Bitcoin Simply By Using Google Chrome - Duration: 13:44. Mr Robot 3,636 views. 13:44. ... Techno Settings 86 views. 5:00. 👉https://get.cryptobrowser.site/3299 Today I will show you how to add to cryptotab in Chrome extensions and Earn free Bitcoins mining while using Google Chro... Learn how to use and setup a bitcoin miner to earn bitcoins , litecoins , dogeecoins etc. Download miner from https://easyminer.net/Downloads/