7 Best Bitcoin Mining Hardware in (Oct 2020)

Bitcoin (BTC) ASIC manufacturer, MicroBT recently revealed its next-generation mining hardware at a virtual launch event on April 17. MicroBT’s forthcoming M30 series of Bitcoin miners, the MS30S++ and the MS30S+, boasts a hash rate of 100 terahashes per second (TH/s).

submitted by Tokenncoin to Tokenncoin [link] [comments]

How could a 100 j/TH miner compete with 65 j/TH miner? /r/Bitcoin

How could a 100 j/TH miner compete with 65 j/TH miner? /Bitcoin submitted by cryptoallbot to cryptoall [link] [comments]

How could a 100 j/TH miner compete with 65 j/TH miner? /r/Bitcoin

How could a 100 j/TH miner compete with 65 j/TH miner? /Bitcoin submitted by ABitcoinAllBot to BitcoinAll [link] [comments]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

An In-Depth Guide to: How do I Fix my Ledger Nano’s Stuck Ethereum Transaction?!?!?! (It’s Been Stuck for Weeks and NOTHING Traditional has Worked!!!!) As Well as: How Do I Choose My Nonce??? I’ve Tried MetaMask, MEW/MyEtherWallet, and Others, but Nothing is Working Correctly!!! I’m Dying by Stress!

So, if you were like me 1-2 months ago, you’ve probably already gone through 2,or 3, ...or 40 articles and guides that probably say something like:
“YeP, eVeRy EtHeReUm UsEr WiLl EvEnTuAlLy HaVe ThE LoW-gAs ExPeRiEnCe, YoU’rE nOt AlOnE! DoN’t FrEaK OuT tHoUgH; ThErE iS a WaY tO fIx It!”
Chances are, every time you read another useless article, you want to kill the nearest inanimate object, even though it was never alive in the first place. Nonetheless, you’re gonna kill it as much as it can be killed, holding nothing back; or, you’re just plotting to and slowly getting closer to executing the plan (and the object) every time you are insulted once again.
However, if you have the ability to download software (MyCryptoWallet) on a PC, it should be safe to relax now. I think you’ve finally found some good news, because I am 99.99...% sure this will work for the issue that so many people are having at this time, around the end of the month of May, year 2020.
More and more people are likely to be having this issue soon, since Ethereum's gas prices have been insanely high lately as well as having 300% price changes in a matter of minutes; Etherscan’s Gas tracker is nearly uselessly-inaccurate at this time. I've heard that there's a congestion attack; that was said a week ago, and it appears to be ongoing... (I can't think of any other suspect besides Justin Sun to blame it on... it must be incredibly expensive to overload the blockchain for this long... I may be wrong though...)
 
Let’s begin
For myself, I was trying to send an ERC20 token when this dreadful issue attacked. Specifically, the token was either BSOV or GRT; I sent them 1 after the other and the first succeeded, and the second one took over a week.
(They’re both great tokens in my opinion and deserve much more attention than they’ve been getting. BSOV is nearing its 1 year anniversary as I write this, and GRT is still in its 90 day community-development progress test, so of course I'm gonna take this opportunity to "shill" them; they are great tokens with great communities).
I was able to finally fix it, after a week of mental agony (also the txn finally processed 1-2 hours before I found the solution, robbing me of the gratitude of fixing it myself... (╯‵□′)╯︵┻━┻ ...but now I guess I can hopefully save some of you the headaches that I endured... ) I’m providing the ability to do the same, in a step by step guide.
Why did I go through all of this trouble? I'd fault the fact that I have ADHD and autism, which in my case can multiply each other’s intensity and cause me to “hyper-focus” on things, much much more than most with the same qualities, intentionally or not. Adderall is supposed to give me a bit of control over it, but except for in a very-generalized way, it’s still 90% up to chance and my default-capabilities to allow me control over my attention with self-willpower. But also Karma and Moons pls... ʘ‿ʘ
 
  1. In MyCrypto, (I'm using the Windows 10 app, version 1.7.10) you will open to a screen that says "How would you like to access your wallet?". Choose Ledger, of course. (Unless your here for some non-ledger issue? Idk why you would be but ok.)
  2. On the next screen (having your nano already plugged in, unlocked, and opened into the Ethereum app) click "Connect to Ledger Wallet"
  3. A screen overlay should appear, titled: "Select an Address". Here is where it may get confusing for some users. Refer to "AAA" below to know how to find your account. (Geez, sorry lol that was a huge amount of info for a reddit reply; I might've over-elaborated a little bit too much. but hey it's valuable information nonetheless!)
  4. After escaping the "AAA" section, you'll have accessed your account with MyCrypto. Awesome! To find your ERC20 tokens, (slight evil-laughter is heard from an unidentifiable origin somewhere in the back of your mind) go to "AAB".
  5. (You may have decided to find the token(s) on your own, rather than daring to submit to my help again; if so, you may pity those who chose the other path... ~~( ̄▽ ̄)~~) Now, once you've added your token, you should revert your attention to the account's transfer fill-out form!
  6. I'll combine the steps you probably understood on your own, already. Put in the address that your stuck transaction is still trying to send currency to. If an ERC20 token is involved, use the drop-down menu to change "ETH" to the token in trouble. Input your amount into the box labeled... wait for it... "Amount". Click on "+Advanced".
  7. Refer to Etherscan.com for the data you will need. Find the page for your "transaction(txn) hash/address" from the transaction history on the wallet/Ethereum-manager you used to send from. If that is unavailable, put your public address that your txn was sent from into the search tool and go to its info page; you should be able to find the pending txn there. Look to open the "more details" option to find the transaction's "Nonce" number.
  8. Put the nonce in the "Nonce" box on MyCrypto; you will contest the pending txn with a new txn that offers larger gas fees, by using the same nonce. If (but most likely "When") the new transaction is processed first, for being more miner-beneficial, the nonce will then be completed, and the old transaction will be dropped because it requests an invalid, now-outdated nonce. Your account will soon be usable!
  9. Go to the Gas Tracker, and it may or may not provide an informative reading. Choose whatever amount you think is best, but choose wisely; if you're too stingy it may get stuck again, and you'd need to pay another txn's gas to attempt another txn-fix.
  10. At the time I write this, I'd recommend 50-100 gwei; to repeat myself, gas requirements are insane right now. To be safe, make the gas limit a little higher than MCW's automatic calculation, you may need to undo the check-mark for "Automatically Calculate Gas Limit".
  11. Press "Send Transaction"!!!
  12. You will need to validate the action through your nano. It will have you validate three different things if you are moving an ERC20 Token. It's a good idea to verify accuracy, as always.
 
Well, I hope this worked for you! If not, you can let me know in a reply and I'll try to figure it out with you. I like making these in-depth educational posts, so if you appreciate it please let me know; I'll probably make more posts like this in the future!
( Surely this is at least far better than Ledger's "Support" article where they basically just tell you "Yeah, we haven't bothered to make a way to manually select nonces. I guess we might try to make that available for Bitcoin accounts at some point in the future; who knows? lol"... that's not infuriating at all, right?)
 
AAA:
Before I tell you how to find your address, I will first make it clear, within the italicized text, exactly which address you are looking for, if you are not already sure:
You may also skip the text written in italics if your issue does not include an ERC20 token, if you wish.
Ledger Live can confuse some users with its interface. On LL, to manage an ERC20 token, you first must go to your Ethereum account and add the token. When you then click on the added token under "Tokens" below the graph chart for your account's ETH amount over time, the screen will then open a new screen, that looks just the same, except focused on the specific ERC20 token. To confuse users further, there is then an option to "Star account", which then add the ETH icon with the ERC20 token's first letter or symbol overlapping, onto the easy access sidebar, as if it was another account of similar independency to the ETH account it was added to.
This improperly displays the two "accounts" relation to each other.
Your ERC20 holdings (at least for any and all ERC20 that I know of) are "held" in the exact-same address as the Ethereum address it was added to, which also "holds" any Ether you've added to it. You send both Ether (ETH) and any ERC20 Tokens to and from only Ethereum addresses of equivalent capabilities, in both qualities and quantities. In all basic terms and uses, they are the same.
So, to know what the problematic account's address is, find the address of the Ethereum account it was added to in Ledger Live.
Now, to find your address on MyCrypto, the most reliable way to find it, that I am aware of, is this:
Open Ledger Live. Go to the screen of your Ethereum address (again, this is the one that you added your ERC20 token, if applicable. If you're not dealing with an ERC20 token, you may ignore everything I've put in Italics). Click on "Edit account"; this is the icon next to the star that may look like a hex-wrench tool. On the new screen-overlay, you will see "> ADVANCED LOGS". Click on the ">" and it will point down while revealing a drop-down with some data that you may or may not recognize/understand. Likely to be found indented and in the middle-ish area, you will see this line, or something hopefully similar:
"freshAddressPath": "44'/60'/X'/0/0",
The "X" will probably be the only thing that changes, and the actual data will have a number in its place; it will not be a letter. Let's now put that line to use in MyCrypto:
Take the 44'/60'/X'/0/0 , and make sure you DO NOT copy the quotation marks, or that comma at the end either.
You can do this before or after copying and/or pasting, but drop the second "/0" at the end; it was not necessary in my case, I expect that you won't need it either, and will probably just make MyCrypto see it as an invalid input.
Okay, now go back to the "Select an Address" screen-overlay in MyCrypto.
Next to "Addresses", click on the box on the right, and you should be shown a list of options to select from in a drop-down menu.
Scroll all the way down, and you should find the "Custom" option at the very bottom. Select it.
A new box will appear; probably directly to the right of the now-shortened box that now displays the "Custom" option that you just selected. This box will offer an interface for typed input. ...yep... once again, believe it or not, you should click it.
Type " m/ ", no spaces before or after.
Type in or paste the data we retrieved from ledger live.
The box should now hold this:
m/44'/60'/X'/0
Again, X should be a number. In fact, that number is probably equal to the number of Ethereum (not including any ERC20 wannabe) accounts that you've made on Ledger Live before making the one we're working on right now! (1st Eth. Acc. would have: X = 0, 2nd: X = 1, 3rd: X = 2, ...)
Make sure you've included every apostrophe ( ' ), and solidus ( / ); there is NO APOSTROPHE for the "m" at the start and the "/0" at the end!
If you press the enter key or click on the check-mark to the right of where you typed, the appropriate addresses will be generated, and the address you created through Ledger Live should be the first one on the list!
Select your address and press "Unlock", and you are now accessing your account through the MyCrypto app's interface!
 
AAB:
In order to access your ERC20 token, you will need to add them first.
You may have to scroll down, but on the right-side of your unlocked account screen, you'll see a box with "Token Balances" as its header.
Click "Scan for tokens". This may take a short bit of time, and when it's done it may or may not display your ERC20 token. If it worked, you can head on back to the main part.
If you got the result I did, it won't display your token, or, if our result was exactly the same, it won't display any at all. However, you should now have the "Add Custom Token" option available, so see where that takes you.
You should discover four boxes, specified in order (Address/ Decimals / Token_Symbol / Balance). You may only need to fill in the "Address" box, but if you need to fill others, you'll find those with the token's address; here's 2 ways to find it, if you don't already know.
Method I:
Since you've probably already been managing your token with Ledger Live, you can go to the LL screen of your "account" for that token; Right next to the account's icon, and directly above the name, you'll see:
Contract: 0x??????...????????
Yes, go on; click it. You'll find the token's page on Etherscan; this was just a shortcut to the same place that both of the two previously referenced methods lead to. Skip to method... III?
Method II:
Go to Etherscan.com, or a similar Ethereum-blockchain-monitoring website, if you have a different preference. Search for the name of your token, and you should be able to see it as a search result. Activate your search manually of by selecting search option. Continue on with Method III.
Method III (Iⅈ what makes you think there was a third method? I said 2!):
At this point, you should find the "contract address" somewhere on the screen. This is the identity of the creature that breathes life into the token, allowing it to exist within the world of Ethereum. Steal it, and tell MyCrypto that you've left some of "your" tokens in the address of your ledger's Ethereum account. MyCrypto will trust and believe you without any concern or doubt, just by putting "your" contract address in the box for "Address"; it's almost too easy!
Well whaddya know, this one isn't actually too long! Don't tell anyone who may have taken a little longer whilst finding out how to do it themselves, though. There's value in trying to do something on your own, at least at first, so I'll let them think they made the right choice (¬‿¬). But take this star for humbling yourself enough to seek further help when you need it, since that is a very important life skill as well!
(o゜▽゜)o☆
Now, back to the useful stuff at the top...
 
EDIT: A comment below made me realize that this info should be added too. Here is my reply to the comment saying I could just use MetaMask. I said in the title that this guide is for questions where MEW and MetaMask aren’t working, but I guess it’s easy to miss. I used my u/caddark account to respond:
(Using this account because u/caddarkcrypto doesn’t meet the karma/age standards to comment; the post had to be manually approved.)
I guess I didn’t make it entirely clear; sorry:
The target audience for this guide is anyone with a stuck Ethereum transaction that was initiated through Ledger Live AND are experiencing the same difficulties I had encountered while trying to fix this issue for myself.
This wasn’t any regular stuck Ethereum transaction. Apparently before, there was an issue that made a Ledger Nano nearly impossible to connect to MetaMask (which is also Brave Browser’s integrated “crypto wallet” for the desktop version) and/or MEW (also perhaps any other browser wallets made for chrome and/or brave) that I heard was supposed to be fixed in a recent update. It might’ve been mostly patched, idk, but during my experience, (in which I was using the latest version of Ledger Live that is available right now,) that issue still remained.
The really weird part was that it successfully connected to the browser wallets again after I fixed the stuck transaction. At first I thought that somehow the txn was what was bugging the connection. However, later, during no txn issues, I was again unable to connect.
Seeing the same connection error again later, I opened up the MCW app I downloaded the day before, and was going to just use that. While in the process of operating MCW, I suddenly had another idea to try for the browser wallet so I went back to that just to quickly test it.
The browser wallet worked perfectly...
I don’t know how, but I think that somehow, something in MCW’s software, makes the browser wallets work. They don’t work for me without having MCW opened in the background first.
EDIT 2: Markdown decided to stop working after I did the first edit... I might fix it tomorrow... how did that happen though??? What did I do?
EDIT 3: nvm, I'm just fixing it now; I won't get much sleep tonight I guess.
submitted by CaddarkCrypto to CryptoCurrency [link] [comments]

I'm trying to do the math on mining.

Given 100% of miners using the same miner, I tried to calculate the profitability of bitcoin mining. but the results seem off. I'm wondering where I went wrong.
"current terahashes (Th/s)" Mining Unit "mining non-current rate($/Th)" "mining non-current rate $/Th)" "Mining Efficiency (J/Th)" "Energy Requirments (J)" "Energy Requirements per Block (kWh) [0.000000277778 J/kWh]" "electric costs ($/kWh)" "current electrical cost to mine 1 block ($)"
8000000 Antminer T19; 84 Th/s; 37.5 J/Th; $1749; $20.82 $384,219.55 37.5 180000000000 50,000.04 0.0715 $3,575.00
current bitcoin reward current bitcoin price current block worth daily block rewards
6.25 9133 $57,081.25 $1,369,950.00
current profit ratio (%)
1596.48%

edit:

"current terahashes (Th/s)" Mining Unit "mining non-current rate($/Th)" "mining non-current rate $/Th)" "Mining Efficiency (J/Th)" "Energy Requirments (J)" "Energy Requirements per Block (kWh) [0.000000277778 J/kWh]" "electric costs ($/kWh)" "current electrical cost to mine 1 block ($)"
8000000 Antminer T19; 84 Th/s; 37.5 J/Th; $1749; $20.82 $5,859,348.20 37.5 2745000000000 762,500.61 0.0715 $54,518.79
current bitcoin reward current bitcoin price current block worth daily block rewards
6.25 9118 $56,987.50 $1,367,700.00
current profit ratio (%)
104.53%
submitted by qwer1234123412341234 to BitcoinBeginners [link] [comments]

Mining bitcoin in college (free electricity!)

I am working with a friend to set up a bitcoin mining rig our university. I'm a business major, but my friend is in engineering and has unlimited free access to a 220v power supply. Would it be worth buying 100 AntMiner S9's on eBay and making our own rig?
The math breaks down as follows according to https://www.cryptocompare.com/mining/calculatobtc?HashingPower=1350&HashingUnit=TH%2Fs&PowerConsumption=137500&CostPerkWh=0&MiningPoolFee=1
1350 TH/s hashrate (with 100 S9s at 13.5 TH/s for each unit)
Electricity cost is zero.
Predicted payout is $3,390/month.
Am I missing something? It seems too good to be true, making 4k/month with only 10k up front.

EDIT: Assume the rig was well hidden and not discovered for a few years.
submitted by josiahkitching to Bitcoin [link] [comments]

08-11 01:54 - 'Canaan's Co-Chairman was 'Out', Chinese BIG3 Bitcoin Miner Makers under Inner Wars' (self.Bitcoin) by /u/CjOnChain removed from /r/Bitcoin within 964-974min

'''
[link]1
The Bitcoin miner maker Canaan Creative (NASDAQ: CAN) lately announced that five members of their board are leaving. As told, the terms of office of two directors, namely Jianping Kong and Qifeng Sun, expired on July 31, and three of its independent directors, namely Hong Zhang, Xiaohu Yang and Mei Luo, expired on August 1.
It is noteworthy that all the departing directors are not allowed to seek appointments nor participate in the elections of the board of directors after the expiration of their terms of office.
On July 9, Canaan Creative’s Hangzhou headquarter underwent business registration record modification. Former directors Kong, Sun and Li Jiaxuan, as well as supervisor Tu Songhua withdrew from the board, and Meng Lu was added as the new supervisor. "The corporate contact person also changed from Zhang Jing to Zhang Ning.
According to the news, recently, the founder Zhang Nangeng had come with some Canaan Creative executives from Beijing to Hangzhou, dismissed a number of managers of Hangzhou headquarter, took away the official seal and business license of the company, later that day, some employees called the police.

[link]2
The same as Bitmain, the first NASDAQ listed Bitcoin miner maker Canaan Creative also built the VIE structure, the main body of the company set up in the Cayman Islands. According to some sources, there has been a power struggle in Canaan Creative, between Zhang’s Beijing office and Kong’s Hangzhou office.
In response to what happened in Hangzhou, Canaan Creative said that, "after the registration modification, the company is running normally, and all subsidiaries in China are headed by Zhang as the company's executive director, general manager and legal representative”.
The power struggle in Canaan is not a single case. As the former industry dominant, BitMain technologies, who has released IPO prospectus in 2018 but with no progress, stuck in a Cayman Islands lawsuit between two founders. Its business is also badly affected.
While another rising star MicroBT’s founder suffered from the disaster behind bars. December 12, 2019, Shenzhen Nanshan Court announced that the criminal suspect Yang Zhenxing was arrested by the crime of official encroachment. Outpost OnChain confirmed the news with MicroBT at the first moment.

[link]3
Dr. Yang was graduated from Tsinghua University, had been the former miner chip design supervisor in BitMain and worked for the mysterious miner maker ‘FriedCat’. He had designed so-called BE300 chip using a "full custom methodology", the chip failed to go into mass production with the disappearance of FriedCat.
Yang disclosed the "Full Custom Methodology” to the founder of BitMain, Zhan Ketuan, which can significantly reduce the cost and power consumption of the chip. Yang worked part-time to help design the S7 miner (1385 chip) and the S9 miner (1385 chip) that made BitMain's mining dominance possible.
In 2016, Yang left BitMain and built up Shenzhen MicroBT Electronic Technology Company. Subsequently, MicroBT released a number of high-performance crypto mining products, quickly squeezed into the market, which had shaken the market dominance of BitMain. Later on, BitMain launched a patent ownership and infringement dispute lawsuit against MicroBT.
However, a source said that there are some hidden facts behind Yang's arrest. As the source acknowledged, during the end of 2019, the lawsuit between BitMain and MicroBT made significant progress, law enforcement officers from Beijing has come to Shenzhen to handle the case. Right at this point, as the chairman, general manager and the actual beneficiary of MicroBT, Yang arrested by a 100 thousands RMB worth embezzlement case. The case between BitMain suspended after that. The timeliness of the embezzlement case and the identity of the informer are worthy of considering.
Satoshi Nakamoto may not have imagined the emergence of ASIC chips when he published the Bitcoin white paper. The mining machine, a money-printing artifact, has created wealth for mining giants such as BitMain, MicroBT and Canaan Creative in just a few years. While the rapid accumulation of wealth, pathetic stories have also been staged, from the vanish of the FriedCat to the BitMain’s official seal wresting case. The road less traveled may not be the right path for everyone.
'''
Canaan's Co-Chairman was 'Out', Chinese BIG3 Bitcoin Miner Makers under Inner Wars
Go1dfish undelete link
unreddit undelete link
Author: CjOnChain
1: p*e*iew.redd.it/c*****q*b5g51.jpg*width=16*0&f*rmat=pj*g&*m*;*uto=*eb*&s=*d609326*f*b62c*9e****be8*947**abfb8b**4 2: pre*iew.r*dd.it**o7z24z8b*g51.png*wi*th=*176&*mp;f*rm*t=**g&*aut*=webp&a*p;s=224cf*10**a*550***54d3*e0*6d1e929**7e*** 3: previ*w.red*.**/8*i23*bab5*5*.jpg*w*dth=1*80&*mp*fo*mat=pjp*&*mp*au*o=web**amp;s=7e289df*ce**2d9ca2de9**c0ce2847c2**e***f
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

Why i’m bullish on Zilliqa (long read)

Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analysed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralised and scalable in my opinion.
 
Below I post my analysis why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since end of January 2019 with daily transaction rate growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralised and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. Maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realised early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralised, secure and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in amount of nodes. More nodes = higher transaction throughput and increased decentralisation. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue disecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as:
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
 
Next he states that: >“blockchains are fundamentally systems for managing valid state transitions”.* For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralised and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimisation on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (>66%) double spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT etc. Another thing we haven’t looked at yet is the amount of decentralisation.
 
Decentralisation
 
Currently there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralised nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching their transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public.They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers.The 5% block rewards with an annual yield of 10.03% translates to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS & shard nodes and seed nodes becoming more decentralised too, Zilliqa qualifies for the label of decentralised in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. Faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time stamped so you’ll start right away with a platform introduction, R&D roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalised: programming languages can be divided into being ‘object oriented’ or ‘functional’. Here is an ELI5 given by software development academy: > “all programmes have two basic components, data – what the programme knows – and behaviour – what the programme can do with that data. So object-oriented programming states that combining data and related behaviours in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behaviour are different things and should be separated to ensure their clarity.”
 
Scilla is on the functional side and shares similarities with OCaml: > OCaml is a general purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognised by academics and won a so called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities safety is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa for Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue:
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships  
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organisations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggest that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already taking advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, AirBnB, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They dont just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities) also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiatives (correct me if I’m wrong though). This suggest in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures & Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

MARA buys 700 new Next Gen Miners

Thoughts on if/how this may affect price?

https://ih.advfn.com/stock-market/NASDAQ/marathon-patent-MARA/stock-news/82423475/marathon-patent-group-announces-purchase-of-700-ne
Marathon Patent Group, Inc. (NASDAQ:MARA) ("Marathon" or "Company"), one of the few Nasdaq listed cryptocurrency mining companies in the United States, today announced the purchase of 700 next generation M30S+ ASIC Miners from MicroBT.
The 700 miners produce 80/Th and will generate 56 PH/s (petahash) of hashing power, compared to companies current S-9 production of 46 PH/s. These next generation MicroBT ASIC miners are markedly more energy efficient than our existing S-9 Bitmain models. The company paid $1,277,455 and the purchase was funded with cash on hand. The company expects to take delivery at our Hosting Facility by the end of May and our hosting partner, Compute North, expects to install them within 48 hours of their arrival.
The M30S+ is one of the latest generations of bitcoin (“BTC”) Application Specific Integrated Circuit (“ASIC”) miners from MicroBT. It can achieve 100 TH/s at 34J/T and has already proven to be highly stable. The units come with a 1-year warranty versus the industry standard 6-month warranty.
submitted by Lazurs to RobinHoodPennyStocks [link] [comments]

[Researh] In 2017 bitcoin network consumed 5 TWh of energy, in 2018 – 29 TWh, in 2019 – 43 TWh. Banking industry consumes 74 TWh per year.

[Researh] In 2017 bitcoin network consumed 5 TWh of energy, in 2018 – 29 TWh, in 2019 – 43 TWh. Banking industry consumes 74 TWh per year.
Electricity consumed by bitcoin network has been constantly and noticeably increasing. During the past years the consumption reached such big a scale, that it can be compared to electricity consumption of some countries, according to BlockchainAnalytics.pro research.
The world’s first cryptocurrency is steadily becoming more popular and expensive every year. This motivates more individuals and companies to enter the mining business to earn a bitcoin share.

More miners, more efficient equipment

To validate a block of transactions and receive a reward, miners compete with each other by solving a deliberately complicated mathematical task, or puzzle. Those miners who own more computing power (hashrate) have more chances to win the competition. This incentivizes miners to buy more powerful equipment that consumes more electricity.
At the same time, mining equipment efficiency is constantly improving, and with time less electricity is required to produce the same hashrate. This factor allows to slow down the increasing demand for electricity.
For example, in 2016 Bitmain, world’s largest manufacturer of mining equipment, launched the legendary Antminer S9, which consumed 100 watts to produce one terahash per second, or 100 W/TH/s. The best modification of Antminer S15, released in 2018, consumed 57 W/TH/s. Currently, the most efficient Antminer S17 consumes only 40 W/TH/s.
https://preview.redd.it/gh343l3p09j41.png?width=930&format=png&auto=webp&s=e350c1e7832e37c1e3c3aeac974428cca7f0f874
It is assumed that the market competition compels manufacturers to keep up with each other in developing more efficient hardware. If some manufacturer brings next-generation chips to market, other manufacturers start to produce chips with the same characteristics at about the same time.
On the other hand, new miners are joining the network, thus increasing the hashrate. So the demand for electricity continues to grow. Also, it can be noticed later that the electricity consumption chart is similar to that of hashrate chart.
https://preview.redd.it/3k32ci6q09j41.png?width=930&format=png&auto=webp&s=e70f600419bcbc9e7e82506b5f12bf4da6f00584

Calculations

The incremental volume of electricity consumption is calculated by multiplying newly added hashrate by the best mining efficiency available at that moment.
The sum of incremental volumes represents cumulative amount of electricity consumed by bitcoin network. The metric is expressed in terawatt-hours (TWh). To get annualized volume in terawatt-hours we multiply the consumption by 24 hours and 365 days.
A 100-day moving average was applied to hashrate to make the final result less dependent on the short-term hashrate fluctuations.
Assumptions, used in this study, are very conservative. It means that the results are in the lower limit of the range of possible volumes, and the actual electricity consumption can be higher.
A detailed explanation and interactive charts are provided here: https://www.blockchainanalytics.pro/btc/electricity-consumption/
https://preview.redd.it/jol3703r09j41.png?width=929&format=png&auto=webp&s=252d4d67ff6882bb32ad63238537a41305719f05

Results

Currently, annualized electricity consumption in bitcoin network is 57 TWh. To help readers get an idea of how much electricity the bitcoin network consumes, a comparison with some countries is provided alongside.
Portugal consumes 49 TWh per year, Romania – 50 TWh, Czech Republic – 59 TWh.
Some more numbers for comparison:
https://preview.redd.it/hka7lcwr09j41.png?width=930&format=png&auto=webp&s=92d6d0b25f922a1e6f0c45c6f994e78aded6f920
According to conservative estimates, the bitcoin network will consume more than 70 TWh in 2020. This is on a par with Chile, a country with 18 million population.

More thoughts (estimations of how much energy banking industry consumes)

Some information from official reports:
Taking into account the information above, we can assume that, on average, banks spend ~20 kWh per customer per year.
Some information on world population:
  • 69% of adults around the world have a banking account (source)
  • 70% of the world population are adults (source)
  • World population is 7.7 billion (source)
Finally: 7.7 billion people * 70% * 69% * 20 kWh per year = ~74 TWh per year
So, we can assume, that banking industry consumes ~74 TWh per year
submitted by answer__42 to btc [link] [comments]

Antminer T19 May Not Affect Bitcoin Hash Rate but Keeps Bitmain Ahead

The Antminer T19 by Bitmain may not have a big impact on the Bitcoin network, and it comes out amid the firm’s internal and post-halving uncertainty.
Earlier this week, Chinese mining-hardware juggernaut Bitmain unveiled its new product, an application-specific integrated circuit called Antminer T19. The Bitcoin (BTC) mining unit is the latest to join the new generation of ASICs — state-of-the-art devices designed to mitigate increased mining difficulty by maximizing the terahashes-per-second output.
The Antminer T19 announcement comes amid the post-halving uncertainty and follows the company’s recent problems with its S17 units. So, can this new machine help Bitmain to reinforce its somewhat hobbled position in the mining sector?
T19: The cheaper S19
According to the official announcement, the Antminer T19 features a mining speed of 84 TH/s and a power efficiency of 37.5 joules per TH. The chips used in the new device are the same as those equipped in the Antminer S19 and S19 Pro, though it uses the new APW12 version of the power supply system that allows the device to start up faster.
Bitmain usually markets its Antminer T devices as the most cost-effective ones, while the S-series models are presented as the top of the line in terms of productivity for their respective generation, Johnson Xu — the head of research and analytics at Tokensight — explained to Cointelegraph. According to data from F2Pool, one of the largest Bitcoin mining pools, Antminer T19s can generate $3.97 of profit each day, while Antminer S19s and Antminer S19 Pros can earn $4.86 and $6.24, respectively, based on an average electricity cost of $0.05 per kilowatt-hour.
Antminer T19s, which consume 3,150 watts, are being sold for $1,749 per unit. Antminer S19 machines, on the other hand, cost $1,785 and consume 3,250 watts. Antminer S19 Pro devices, the most efficient of three, are considerably more expensive and go for $2,407. The reason Bitmain is producing another model for the 19 series is due to what is known as "binning" chips, Marc Fresa — the founder of mining firmware company Asic.to — explained to Cointelegraph:
“When chips are designed they are meant to achieve specific performance levels. Chips that fail to hit their target numbers, such as not achieving the power standards or their thermal output, are often ‘Binned.’ Instead of throwing these chips in the garbage bin, these chips are resold into another unit with a lower performance level. In the case of Bitmain S19 chips that don’t make the cutoff are then sold in the T19 for cheaper since they do not perform as well as the counterpart.” The rollout of a new model “has nothing to do with the fact that machines are not selling well,” Fresa went on to argue, citing the post-halving uncertainty: “The biggest reason machines probably are not selling as well as manufacturers would like is because we are on a bit of a tipping point; The halving just happened, the price can go anyway and the difficulty is continuing to drop.” Product diversification is a common strategy for mining hardware producers, given that customers tend to aim for different specifications, Kristy-Leigh Minehan, a consultant and the former chief technology officer of Genesis Mining, told Cointelegraph:
“ASICs don’t really allow for one model as consumers expect a certain performance level from a machine, and unfortunately silicon is not a perfect process — many times you’ll get a batch that performs better or worse than projected due to the nature of the materials. Thus, you end up with 5–10 different model numbers.” It is not yet clear how efficient the 19-series devices are because they have not shipped at scale, as Leo Zhang, the founder of Anicca Research, summed up in a conversation with Cointelegraph. The first batch of S19 units reportedly shipped out around May 12, while the T19 shipments will start between June 21 and June 30. It is also worth noting that, at this time, Bitmain only sells up to two T19 miners per user “to prevent hoarding.”
Hardware problems and competitors
The latest generation of Bitmain ASICs follows the release of the S17 units, which have received mostly mixed-to-negative reviews in the community. In early May, Arseniy Grusha, the co-founder of crypto consulting and mining firm Wattum, created a Telegram group for consumers unsatisfied with the S17 units they purchased from Bitmain. As Grusha explained to Cointelegraph at the time, out of the 420 Antminer S17+ devices his company bought, roughly 30%, or around 130 machines, turned out to be bad units.
Similarly, Samson Mow, the chief strategy officer of blockchain infrastructure firm Blockstream, tweeted earlier in April that Bitmain customers have a 20%–30% failure rate with Antminer S17 and T17 units. “The Antminer 17 series is generally considered not great,” added Zhang. He additionally noted that Chinese hardware company and competitor Micro BT has been stepping on Bitmain’s toes lately with the release of its highly productive M30 series, which prompted Bitmain to step up its efforts:
“Whatsminer gained significant market share in the past two years. According to their COO, in 2019 MicroBT sold ~35% of the network hashrate. Needless to say Bitmain is under a lot of pressure both from competitors and internal politics. They have been working on the 19 series for a while. The specs and price look very attractive.” Minehan confirmed that MicroBT has been gaining traction on the market, but refrained from saying that Bitmain is losing market share as a result: “I think MicroBT is offering option and bringing in new participants, and giving farms a choice. Most farms will have both Bitmain and MicroBT side by side, rather than exclusively host one manufacturer.”
“I would say that MicroBT has taken up the existing market share that Canaan has left,” she added, referring to another China-based mining player that recently reported a net loss of $5.6 million in the first quarter of 2020 and cut the price of its mining hardware by up to 50%.
Indeed, some large-scale operations seem to be diversifying their equipment with MicroBT units. Earlier this week, United States mining firm Marathon Patent Group announced that it had installed 700 Whatsminer M30S+ ASICs produced by MicroBT. However, it is also reportedly waiting for a delivery of 1,160 Antminer S19 Pro units produced by Bitmain, meaning that it also remains loyal to the current market leader.
Will the hash rate be affected?
Bitcoin’s hash rate plummeted 30% soon after the halving occurred as much of the older generation equipment became unprofitable due to the increased mining difficulty. That spurred miners to reshuffle, upgrading their current rigs and selling older machines to places where electricity is cheaper — meaning that some of them had to temporarily unplug.
The situation has stabilized since, with the hash rate fluctuating around 100 TH/s for the past few days. Some experts attribute that to the start of the wet season in Sichuan, a southwest Chinese province where miners take advantage of low hydroelectricity prices between May and October.
The arrival of the new generation of ASICs is expected to drive the hash rate even higher, at least once upgraded units become widely available. So, will the newly revealed T19 model make any impact on the state of the network?
Experts agree that it won’t affect the hash rate to a major degree, as it’s a lower output model compared with the S19 series and MicroBT’s M30 series. Minehan said she doesn’t expect the T19 model “to have a huge impact that’s an immediate cause of concern,” as “most likely this is a run of <3500 units of a particular bin quality.” Similarly, Mark D’Aria, the CEO of crypto consulting firm Bitpro, told Cointelegraph:
“There isn’t a strong reason to expect the new model to significantly affect the hashrate. It might be a slightly more compelling option to a miner with extraordinarily inexpensive electricity, but otherwise they likely would have just purchased an S19 instead.” Bitmain continues to hold leadership despite internal struggle
At the end of the day, manufacturers are always in an arms race, and mining machines are simply commodity products, Zhang argued in a conversation with Cointelegraph:
“Besides price, performance, and failure rate, there are not many factors that can help a manufacturer differentiate from the others. The relentless competition led to where we are today.” According to Zhang, as the iteration rate naturally slows down in the future, there will be more facilities using “creative thermal design such as immersion cooling,” hoping to maximize the mining efficiency beyond just using most powerful machines.
As for now, Bitmain remains the leader of the mining race, despite having to deal with the largely defunct 17 series and an intensifying power struggle between its two co-founders, Jihan Wu and Micree Zhan, which recently resulted in reports of a street brawl.
“Due to its recent internal issues, Bitmain is facing challenges to keep its strong position in the future thus they started to look at other things to expand its industry influences,” Xu told Cointelegraph. He added that Bitmain “will still dominate the industry position in the near future due to its network effect,” although its current problems might allow competitors such as MicroBT to catch up.
Earlier this week, the power struggle inside Bitmain intensified even further as Micree Zhan, an ousted executive of the mining titan, reportedly led a group of private guards to overtake the company’s office in Beijing.
Meanwhile, Bitmain continues to expand its operations. Last week, the mining company revealed it was extending its “Ant Training Academy” certification program to North America, with the first courses set to launch in the fall. As such, Bitmain seems to be doubling down on the U.S.-based mining sector, which has been growing recently. The Beijing-based company already operates what it classifies as “the world’s largest” mining facility in Rockdale, Texas, which has a planned capacity of 50 megawatts that can later be expanded to 300 megawatts.
submitted by melissaBrian0 to Bitcoin [link] [comments]

05-05 19:14 - 'An Island Nation with Bitcoin as the currency' (self.Bitcoin) by /u/Decamerch removed from /r/Bitcoin within 72-82min

'''
Hello all,
I am here with my plan for my [subreddit]1 Reddit Nation
If you are interested in joining a (hopefully) newly formed island nation then this is the place to be.
I have prepared a plan that explains how we will go about doing such a task. More detailed elaborations for each component of the plan will be given at request.
Obviously the first question is where we would have our island. I have identified places of interest. One place of interest is the Nation of Belize. Belize is a small nation with a low GDP of 2 Billion and they are selling off most of their island. Islands with 50-100 acres can be acquired for around 500,000; give or take 50,000. From the people (Government Officials) I have contacted, they are perfectly okay with this plan.
Now here is a 5 step proposal of how this will come to fruition (I will expand on how we will finance this)
  1. Acquire the island
  2. Set up the initial infrastructure
    1. Form of Government that I propose is a constitutional monarchy
      1. Country will be run as a democracy (two chamber form of parliament)
      2. Noble titles such as Duke, Earl, Count, Lord, Baron etc will be sold off to help initially finance the island.
    2. Establishment of the Government Building
      1. For now this is where the government will convene until more infrastructure is added and the island is improved.
      2. People will be made citizens at this location
    3. Establishment of Civil Services
      1. Waste collection, Police, Social Services
    4. Establishment of a Port
      1. This will allow supplies to enter the island.
      2. This will allow for the island to participate with the rest of the world economically(I will expand on this later).
      3. The port will function as the entrance point and exit until the runway can be constructed.
    5. Establishment of Resident Housing
      1. This temporary housing will be until the island can be developed and more permanent buildings can be put up.
      2. Resident Housing and the Government building will be set up near the port until island development is completed
    6. Set up a massive solar powered crypto mining operation to help finance further development of the island
      1. A partnership with big mining companies can be brokered to have this set up
  3. Make the Island a desirable location
    1. Set up the island as a luxury city
      1. Free housing for citizens
      2. Free healthcare for citizens
      3. Free schooling and university for citizens
    2. Build resorts and legalize gambling on the island
      1. The revenue generated from such activities will help finance further development of the island
      2. With the revenue generated from this, the island will be able to provide for the residents a luxury city
      3. The gambling industry investments will help to finance the island as well
    3. Make the island a banking haven
      1. Set up a bank on the island
      2. No KYC laws will be enforced on the island
      3. This will attract forgien investment into the island
    4. Allow cryptocurrency companies to conduct business without oversight and for miners to set up large scale operations using solar powered energy
    5. No income tax,sales tax, capital gains tax or corporate on the island
      1. Commercial businesses such as casinos, resorts, and banks will just pay slightly inflated property taxes
      2. This will help attract a lot more forgien investment as well
      3. Will attract companies to set up offices here and thus bring jobs to the island.
  4. Expand on the island infrastructure
    1. Build an airport. The islands have enough space to accommodate runways for planes even up to jumbo jets
    2. Build more free luxury housing for residents
    3. Establish schools and universities
    4. Establish libraries
    5. Establish Museums
    6. Establish a healthcare system
  5. Enjoy the luxury haven of an Island that we have built
Now for the question of how much this island will cost and how we will get the funding
According to my calculations (you can look at them below) it will cost us $2,600,000
Now in regards to how we will raise that sum
If you have made it this far, please join the [subreddit]1 for this plan
More information to come soon, thank you.
'''
An Island Nation with Bitcoin as the currency
Go1dfish undelete link
unreddit undelete link
Author: Decamerch
1: www.reddi**co*/*/T**Red*itNatio*/ 2: www.*e**it.com/Th**edd*tN*tion*
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

Bitcoin Mining Unit Manufacturer MicroBT Nibbles at Bitmain’s Market Share

Bitcoin Mining Unit Manufacturer MicroBT Nibbles at Bitmain’s Market Share


Bitcoin miner maker MicroBT has rapidly expanded market share by selling over half a million units in 2019, chipping away at rival Bitmain's dominance.
MicroBT sold about 600,000 units of its flagship WhatsMiner M20 series last year, Vincent Zhang, sales head of the Shenzhen-based company, said in an online panel hosted by Chinese mining pool Poolin on Thursday in a WeChat group.
These products generate a computing power of about 60 terahashes per second (TH/s) on average, he said. That means the newly delivered 600,000 units may have contributed over 30 exahashes (EH/s) of hashing power to the bitcoin network in 2019. (1 EH = 1 million TH).
Amid bitcoin's price jump throughout 2019, the network's two-week average computing power more than doubled from just 40 EH/s around the end of 2018 to nearly 100 EH/s in December. That'd mean close to half of bitcoin's computing power growth in 2019 may have come from equipment delivered by MicroBT.
Zhang didn't specify the precise average unit price of these batches, as they could fluctuate depending on bitcoin's price over the year. But the firm's various models in its M20 product line are generally priced between $24 to $30 per terahash, meaning the firm has brought home a high nine-figure revenue in U.S. dollars for 2019.
Bitcoin's current computing power stands at 110 EH/s. That also means MicroBT may account for around 30 percent of bitcoin mining power sold right now, making it one of the largest and fastest-growing miner makers in the world.
submitted by fs15155 to u/fs15155 [link] [comments]

The total computing power now dedicated to securing the bitcoin blockchain has set yet another record.

According to data from mining services operator BTC.com, the average bitcoin mining hash rate over the last two weeks has reached 71.43 quintillion hashes per second (EH/s), up from 64.49EH/s on July 23. The threshold was breached as bitcoin adjusted its mining difficulty at block height 586,672 on Monday 2:52 UTC – that is a 6.94EH/s, or 10.78 percent jump since mid July.
Bitcoin mining difficulty is a measure of how hard it is to compete for mining rewards on bitcoin. Just how difficult the bitcoin software makes it to generate new blocks adjusts every 2,016 blocks – approximately every 14 days – to ensure the block production time remains about 10 minutes at the next cycle.
Assume this additional 6.9EH/s (or 6.9 million tera hashes per second, TH/s) computing power has all come from powerful ASIC miners, such as Bitmain’s AntMiner S17 or MicroBT’s WhatsMiner M20S, both of which boast a mining rate of around 55TH/s and recently hit the market.
That means more than 100,000 top-of-line ASIC miners could have been switched on within the past two weeks. Further, given these products have been sold for at least $2,000 each, this equates to some $200 million in revenue pocketed for major miner makers.
The continued interest in bitcoin mining comes at a time when the cryptocurrency’s price appears to be en route to challenging all-time highs, however distantly, and amid the arrival of the rainy season in China, which leads to cheaper hydropower electricity costs in the country’s southwest provinces – a region that is reported to account for 50 percent of the global mining activity,
Miners in China estimated earlier this year that bitcoin’s hash rate in the summer would break the level of 70EH/s. To be clear, at several single points of time, bitcoin’s hash rate had already crossed that level in June and even reached 80EH/s around Aug. 1.
However, today marks the first time that the two-week average computing power has been able to remain above the 70EH/s threshold. As such, bitcoin’s mining difficulty has also set a new record of nearly 10 trillion.

Market change

Amidst this uptick in mining interest, there have been notable changes in the mining market, where top manufacturers are racing to produce more powerful equipment.
For instance, in Bitmain’s 2018 initial public offering prospectus, the Beijing-based mining giant claimed it had a 70 percent market dominance. Now, it may be facing serious competition from rival players that some believe are capable of shipping more top-of-line products with better profitability.
Michael Zhong, a former mining analyst who now operates mining farms at a startup called Force Mine, told CoinDesk that based on his experience, the production capacity ranking among major Chinese miner makers for their flagship products have changed over the years.
Zhong explained that from 2017 to 2018, Bitmain had topped the list with its AntMiner S9 series miners, followed by Canaan’s Avalon 8 series machines. InnoSilicon, Ebang and former Bitmain design director’s MicroBT were all in the third position at the time.
But from January to June this year, the delivery capacity ranking has reshuffled, with now MicroBT’s WhatsMiner M20 series at the top, followed by Bitmain’s S17 series miners and then InnoSilicon, Canaan, and Ebang, Zhong added.
According to F2pool’s miner profit tracker, Bitmain’s flagship AntMiner S17 Pro ranks third in terms of mining profitability, following BitFury’s Tardis and MicroBT’s WhatsMiner M20S. The cost for WhatsMiner M20S is around $3,000, while that of AntMiner S17 Pro is around $4,000 each, based on the information advertised on the two firms’ websites.
Although orders for these flagship machines have queued up until November and December this year, MicroBT’s founder Zuoxing Yang told CoinDesk previously that the bottleneck of production capacity is the availability of chips from suppliers.
For example, MicroBT uses 10-nm chips for its M20 series, which are relatively more affordable with a higher level of availability compared to more advanced 7-nm chips used by Bitmain for its AntMiner S17 series equipment.
While Bitmain has always been relying on chips supplied by Taiwan Semiconductor Manufacturing Company (TSMC), MicroBT has switched from TSMC to Samsung earlier this year for its flagship products.
Both TSMC and Samsung have estimated in their most recent Q2 earnings calls that the demand for cryptocurrency mining chips will come back in the third and the fourth quarter this year.
Operating miners image courtesy to Hashage
https://www.coindesk.com/bitcoins-computing-power-sets-new-record-as-over-100k-miners-go-online?utm_source=twitter&utm_medium=coindesk&utm_term=&utm_content=&utm_campaign=Organic%20
submitted by Muxa84 to Bitcoin [link] [comments]

Burstcoin Is A Robust And Unique Cryptocurrency: Proof of Capacity (PoC) Ensures Decentralization, Energy Efficiency, And Low Barrier To Entry

http://www.cypherpunklabs.com/burstcoin-is-a-robust-and-unique-cryptocurrency-proof-of-capacity-poc-ensures-decentralization-energy-efficiency-and-low-barrier-to-entry/
Decentralization is perhaps the fundamental reason why Bitcoin has been successful. Since Bitcoin is decentralized, its network cannot be controlled by any government, corporation, or other centralized entity, and this is why Bitcoin still exists to this day rather than being shutdown a long time ago. Bitcoin achieves decentralization through its Proof of Work (PoW) algorithm, where miners around the world cryptographically hash transactions into blocks and receive block rewards for their efforts, and nodes constantly check to ensure that all confirmed transactions are following consensus rules.
The major caveat with PoW is it is energy intensive. This has especially become a problem due to the rapid rise in Bitcoin’s price long term, which has resulted in an arms race of sorts to amass the most hashing power in order to obtain the most mining profits. Indeed, the Bitcoin hash rate has risen orders of magnitude, from MH/s, to GH/s, to TH/s, to PH/s, and now up to its all-time high so far of 84 EH/s. This represents exponentially more computing resources and energy consumption.
This is a problem for two reasons. First off, there is a very high barrier to entry for new users to mine Bitcoin. It requires thousands of dollars of mining equipment to make any worthwhile profit from mining Bitcoin.
Secondly, Bitcoin mining consumes a massive amount of energy worldwide. It is estimated by Digiconomist that Bitcoin mining uses 73.12 TWh of energy annually, equivalent to the electricity consumption of the entire country of Austria, or 0.33% of total global electricity consumption. This releases nearly 35 Megatons of Carbon Dioxide annually, contributing to global warming, aside from other environmental damage caused by burning fossil fuels and manufacturing mining equipment. Digiconomist may be an overestimate of Bitcoin’s environmental impact, but it is somewhere in the ballpark.
Numerous alternative cryptocurrencies have tried to be environmentally friendly via using the Proof of Stake (PoS) algorithm, but this sacrifices decentralization, since all the voting rights end up concentrated into the hands of developers and major bag holders.
This is where Proof of Capacity (PoC), formerly called Proof of Space, comes in. Instead of using specialized Bitcoin mining equipment, PoC simply uses hard drive space to mine cryptocurrency. Burstcoin (BURST) is the #1 PoC cryptocurrency. Bitcoin HD (BHD) is another PoC cryptocurrency, but it has a highly centralized supply with 3.1 million out of 5 million total coins in the hands of the developers, so it is nonsensical to choose BHD considering that BURST has a highly decentralized supply. The problem with a centralized supply is it can cause a coin’s value to collapse long term due to developers dumping on the market.
In order to start mining BURST, a user simply allocates part of their hard drive, and this area of hard drive is plotted. Plotting is a 1-time hashing cycle where the hard drive is filled with cryptographic hashes via the Shabal cryptographic algorithm. The node also has to synchronize with the BURST blockchain before mining. Fortunately, the BURST blockchain is less than 9 GB, versus the Bitcoin blockchain which is nearly 240 GB.
Once plotting and synchronization is complete the user can begin mining. During each mining round the plot file is searched to find the correct cryptographic hash for the block, and when the correct hash is found the user receives a block reward. Essentially, the hashes in the plot file can be thought of as lottery tickets, and the bigger the size of the plot, meaning the more hard drive space dedicated to mining BURST, the more likely it is to find the correct hash.
Like with Bitcoin mining, users can join pools so that even if they have a small amount of hard drive space they can still earn BURST at a steady pace.
Since BURST’s PoC algorithm simply reads a hard drive versus the intense computational work of Bitcoin’s PoW, BURST mining uses a negligible amount of electricity. It is estimated that each BURST transaction consumes 0.0024 KWh of electricity, versus about 1,000 KWh used for each Bitcoin transaction.
Aside from being far more environmentally friendly, electricity costs are negligible for BURST miners, so BURST miners earn nearly 100% profit. This opens the door for users with any level of technology to profitably mine BURST, including personal computers and technically even cell phones. Compare this to Bitcoin where mining with even a powerful personal computer is impossible.
Ultimately, BURST’s energy efficiency makes the barrier to entry very low, a user simply needs to have hard drive space to mine BURST. This results in the BURST network being highly decentralized.
Notably, miners do not have to buy any special equipment to mine BURST, they just use spare hard drive space that was sitting unused, versus Bitcoin mining where specialized hardware that costs thousands of dollars is required. Bitcoin mining rigs often become obsolete with time, and also have no other use besides Bitcoin mining, whereas hard drive space used for BURST mining never becomes obsolete and can easily be freed up and used for storage by deleting the plot file.
In summary, BURST is one of the most unique and fundamentally robust cryptocurrencies due to its PoC algorithm, which ensures decentralization while simultaneously guaranteeing energy efficiency and a low barrier for miner entry.
submitted by turtlecane to burstcoin [link] [comments]

12-03 20:44 - 'An Island Nation Composed of Redditors' (self.europe) by /u/OGKebabEater removed from /r/europe within 105-115min

'''
Hello all,
I am here with my plan for my [subreddit]1 Reddit Nation
If you are interested in joining a (hopefully) newly formed island nation then this is the place to be.
I have prepared a plan that explains how we will go about doing such a task. More detailed elaborations for each component of the plan will be given at request.
Obviously the first question is where we would have our island. I have identified places of interest. One place of interest is the Nation of Belize. Belize is a small nation with a low GDP of 2 Billion and they are selling off most of their island. Islands with 50-100 acres can be acquired for around 500,000; give or take 50,000. From the people (Government Officials) I have contacted, they are perfectly okay with this plan.
Now here is a 5 step proposal of how this will come to fruition (I will expand on how we will finance this)
  1. Acquire the island
  2. Set up the initial infrastructure
    1. Form of Government that I propose is a constitutional monarchy
      1. Country will be run as a democracy (two chamber form of parliament)
      2. Noble titles such as Duke, Earl, Count, Lord, Baron etc will be sold off to help initially finance the island.
    2. Establishment of the Government Building
      1. For now this is where the government will convene until more infrastructure is added and the island is improved.
      2. People will be made citizens at this location
    3. Establishment of Civil Services
      1. Waste collection, Police, Social Services
    4. Establishment of a Port
      1. This will allow supplies to enter the island.
      2. This will allow for the island to participate with the rest of the world economically(I will expand on this later).
      3. The port will function as the entrance point and exit until the runway can be constructed.
    5. Establishment of Resident Housing
      1. This temporary housing will be until the island can be developed and more permanent buildings can be put up.
      2. Resident Housing and the Government building will be set up near the port until island development is completed
    6. Set up a massive solar powered crypto mining operation to help finance further development of the island
      1. A partnership with big mining companies can be brokered to have this set up
  3. Make the Island a desirable location
    1. Set up the island as a luxury city
      1. Free housing for citizens
      2. Free healthcare for citizens
      3. Free schooling and university for citizens
    2. Build resorts and legalize gambling on the island
      1. The revenue generated from such activities will help finance further development of the island
      2. With the revenue generated from this, the island will be able to provide for the residents a luxury city
      3. The gambling industry investments will help to finance the island as well
    3. Make the island a banking haven
      1. Set up a bank on the island
      2. No KYC laws will be enforced on the island
      3. This will attract forgien investment into the island
    4. Allow cryptocurrency companies to conduct business without oversight and for miners to set up large scale operations using solar powered energy
    5. No income tax,sales tax, capital gains tax or corporate on the island
      1. Commercial businesses such as casinos, resorts, and banks will just pay slightly inflated property taxes
      2. This will help attract a lot more forgien investment as well
      3. Will attract companies to set up offices here and thus bring jobs to the island.
  4. Expand on the island infrastructure
    1. Build an airport. The islands have enough space to accommodate runways for planes even up to jumbo jets
    2. Build more free luxury housing for residents
    3. Establish schools and universities
    4. Establish libraries
    5. Establish Museums
    6. Establish a healthcare system
  5. Enjoy the luxury haven of an Island that we have built
Now for the question of how much this island will cost and how we will get the funding
According to my calculations (you can look at them below) it will cost us $2,600,000
Now in regards to how we will raise that sum
If you have made it this far, please join the [subreddit]1 for this plan
More information to come soon, thank you.
'''
An Island Nation Composed of Redditors
Go1dfish undelete link
unreddit undelete link
Author: OGKebabEater
1: w**.reddit*com*Th**edd*tNa*ion/ 2: *ww.*eddit*com/Th*Red*itNa**o*/
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

Gekkoscience NewPac - USB BTC Mining (100 GH/s + on ... How to Mine Bitcoin with Only $100 Budget - YouTube Automatic-Mining X 100 Bitcoin! Miner 0.02 BTC Daily ... 100 TH/s! 4500$ UPGRADE! CLOUD MINING BITCOIN mit Hashflare deutsch Free Bitcoin Cloud Mining - 300 TH/S - $1700 USD PROMO - Free 100 GHS Bonus

Live income estimation updated every minute. Description. Model Antminer S19 Pro (110Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 110Th/s for a power consumption of 3250W. iBeLink™ DSM7T Blake256 Miner 7ths hashrate $ 3,399.00 / 0.32233 Ƀ Read more; INNOSILICON Terminator 2 (T2) Miner SHA-256 Miner $ 1,049.00 / 0.09948 Ƀ Read more; INNOSILICON D9 DecredMaster Blake256 Algorithm Mining $ 1,699.00 / 0.16112 Ƀ Read more; Bitmain Antminer L3+ 504 Mh/s Litecoin Miner Scrypt Miner $ 270.00 / 0.0256 Ƀ Read more The Bitcoin.com mining pool has the lowest share reject rate (0.15%) we've ever seen. Other pools have over 0.30% rejected shares. Furthermore, the Bitcoin.com pool has a super responsive and reliable support team. What is Bitcoin Mining Hardware. The right bitcoin mining hardware is a necessity if you want to earn during bitcoin mining. Before, miners used a central processing unit (CPU) to mine, but it wasn’t fast enough.. So, miners moved on to using graphical processing unit (GPU) in computer graphics cards as they have data 50 to 100 times faster and consume less power per unit of work. The total power of the Bitcoin network has broken through 100 petahashes per second (PH/s) for the first time in the cryptocurrency’s five years of life. According to blockchain.info, the hash rate peaked at 103.4 PH/s on Wednesday before fluctuating back down to 85.3 PH/s on Thursday.It rose up on Friday to around 98 PH/s and will likely break 100 again over the weekend.

[index] [32025] [26806] [31668] [20323] [12387] [18629] [19732] [9033] [15255] [30455]

Gekkoscience NewPac - USB BTC Mining (100 GH/s + on ...

#bitcoin #bitcoins #bitcoinprice GET A Chance To WIN $100 BITCOIN EACH MONTH By 1. liking video! 2. SUBSCRIBE! 3. share! 4. COMMENT: Bitcoin Forever DISCLAIMER: OPINIONS THAT APPEAR IN VIDEOS ARE ... Bitcoin and Ethereum Mining is a cloud computing service that provide shared and managed computing resources optimized for various blockchain mining solutions. The company owns and maintains the ... What are the BEST BITCOIN MINING RIGS in 2020?! Let's review the best Bitcoin miners and their profitability. Bitmain just released the Antminer S19 and S19 ... No Deposit 2 Bitcoin Auto New GPU Bitcoin Mining 100% Free and Fast withdraw part 2 https://bit.ly/3bB3eTf https://bit.ly/3bK2ihd https://bit.ly/3lPVT8Z http... New video every Tuesday! Today we are taking a look at the Gekkoscience NewPac USB miner. We'll check all the hardware you need for setting it up, discuss so...

#